There is a newer version of this product available

1101-18-1 Dial Indicator Diameter Gage 69005

1101,1101M Dial Indicator Diameter Gages
12-18GÇ¥ Length Range

Dial Indicator Diameter Gages measure both outside and inside diameters by comparing dimensions to gage blocks or an adjustable setting master. Each gage consists of a strong rectangular box beam with a sensitive gaging contact at one end and a reference gaging contact at the other. The 1101 gages allow for measurement beyond the size range of our 1102 models. Each gage adjusts a full 6" or 150mm. The contact carriers are vertically adjustable to handle various work depths. Special contacts are available. This tool has dowel (line) contacts at one end of the gage feet, and a button (point) contact gage at the other end of the feet. These can be reversed as needed and the gaging depth can be set within a range of 2-3/4" or 70mm. This gage should be checked against our 1126 Master for a precise reference standard during production gaging. Range: 12-18", Graduation: .0001"

This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

3D CAD Files / Exploded Parts Diagram
Product Testimonials
California Prop 65

Contact Starrett


  • The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
  • There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
  • Gage depth is set by adjusting the gage feet up or down
  • A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
  • The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
  • Unless otherwise specified, the dial indicator sent with the gage reads in .0005" increments with a total range of -¦.030"
  • The dial has a double row of graduations reading in opposite directions GÇô minus in red and plus in black


  • Made in America: Yes
  • Range (in): 12-18"
  • Graduations (in): .0001"


    Catalog 33 - Section 5 - Dial and Electronic Indicators and Gages

    We offer a variety of each of the major classes: mechanical dial, electronic display, lever style test and back plunger. Indicator requirements are very specific and Starrett offers everything you need: a broad line of each indicator type, an extensive range of accessories to configure and position the gage, and as needed, an indicator-based, custom engineered solution.

    Precision Hand Tools (Catalog 33)

    612 page catalog featuring precision hand tool, force measurement, vison systems, optical comparators, laser measurement, and flat stock.

3D CAD Files / Exploded Parts Diagram

    Login to see related product files. Or create an account.

Product Testimonials

    Write a product review


      Member of Kit
      Item #DescriptionPart No.QtyInformation
      1GAGE,DIAL 12-18" RAN30270-01
      2•BLOCK, REST ASSEMBLY30217-01
      3•NUT, TEE30216-01
      4•ROD, SEN. CONTACT30207-01
      5•BLOCK, IND. CONTACT30262-01
      6•CAP, END30226-02
      7•HOUSING, INDICATOR30235-01
      8•NUT, TEE SLOT30237-01
      9•BEAM, GAGE 12-18"30201-181
      10•TRANS, REED ASSEMBLY30202-01
      11•SCREW, #8-32 BHCS X .375 LONG16563-09
      12•BLOCK, REF CONTACT30215-01
      13•SCREW, #10-32 BHCS X .574 LONG30247-04
      14•BAR, CONTACT #110130214-01
      15•CONTACT POINT, 1/4"PT072152
      16•CONTACT POINT,#7PT06632-72
      17•RING, PRELOAD ACT30203-01
      18•SCREW, .125-40 SLOT X .261 LONG08457-02
      19•PRELOAD SUB ASSEMBLY30225-01
      20••PLUNGER, GAGE SPRING30147-01
      21••SPR, .217X.182X1.9730251-01
      22•SCREW, #4-40 BHCS X .250 LONG30117-04
      23•NUT,#10-32 TEE30254-01
      25•SPR WSHR, .206X.37230238-05
      26•SCREW, #10-32 BHCS X .375 LONG30250-01
      28•SCREW, #1-64 SLOT X .08206839-01
      29•CASE SUB ASSEMBLY22702-01
      30•SCREW, #4-48 SLOT X .231 LONGPT09284(2)1
      31•CAP, CASE STEMPT093571
      32•SCREW, .140-40 CLAMP X .281 LONGPT11155(2)1
      33•BEZEL CLAMP, PLASTIC23417-0(2)1
      34•RACK, .200 RANGEPT094801
      35•PIN, RACK GUIDE #25PT06848(2)1
      37•SCREW, #1-64 SLOT X .154 LONGPT09348(2)2
      38•SPR, RACK.105X.125X.25024575-01
      39•BRIDGE/PLATE ASSEM.11612-01
      40••BRIDGE SUB ASSEMBLY09400-01
      41•••BRIDGE #2509408-01
      42•••BEARING, JEWEL #25PT09422(2)1
      44•••PIN, .094X.30009425-0(2)2
      45••PLATE SUB ASSEMBLY09437-01
      48•••PIN, .093X.11109431-0(2)2
      49••SCREW, #3-56 PHILLIP X .263 LONGPT09424(2)4
      50••SCREW, #1-64 SLOT X .148 LONG23449-0(2)1
      51••POST, HAIRSPRING09418-0(2)1
      52••PINION, HANDPT08973(2)1
      53••HAIRSPR GEAR ASSEM.PT092881
      54••GEAR, RACK ASSEMBLYPT092991
      56•SCREW, #3-56 SLOT X .556 LONGPT09352(2)2
      58•BEZEL & CRYSTALPT99419(2)1
      59••BEZEL IND., PLASTICPT23416(2)1
      60••CRYSTAL, #25PT06622(2)1
      61•SPR WSHR,1.593X2.020X.006PT06673A(2)1
      62•HAND, #25PT08308(2)1
      63•HAND, #25 TELL TALEPT06661(2)1
      64•DIAL,STAT 25-611-620J11620-01
      65•DIAL, MOV 25-111-63011621-01
      66•CONTACT POINT, 1/4"PT07215(2)1
      67SCREW, #3-56 PHILLIPS X .190 LONGPT09307(2)4
      68BACK, #8413460-0(2)1
      69SCREW, .125-40 SLOT X .261 LONG08457-0(2)2
      70SCREW, #4-40 BHCS X .250 LONG30117-0(2)2

    California Proposition 65 Warning

      WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: